Glossary
ADR
The European Agreement covering the International Carriage of Dangerous Goods by road. These regulations govern the road transportation of Dangerous Goods between European countries.
AAR - ASSOCIATION OF AMERICAN RAILROADS
The name of the standard that tank containers are required to have been tested to before they are acceptable for carriage on US railroads
ASME - AMERICAN SOCIETY OF MECHANICAL ENGINEERS
Publisher of internationally recognised design codes. Most tanks are described as being pressure vessels built to the design code ASME VIII, Division 1.
BALL VALVE
A valve which is closed by rotating a ball with a central hole through 90 degrees.
BSP - BRITISH STANDARD PIPE
BSP thread is a thread form common on pipe fittings. Most chemical tanks would present with a 3" BSP thread bottom outlet pipe
BUTTERFLY VALVE
A valve containing a circular plate which rotates through 90 degrees to open or close. It is the most common type of valve on bottom outlets
BIFA - BRITISH INTERNATIONAL FREIGHT ASSOCIATION
The Association of the British International Forwarders.
CHECK DIGIT
A method to check that your container number is valid. Internationally recognised through ISO. (see check digit page for more information)
COMPANY SAFETY MANUAL
The instruction and guidance system that is place for a particular company. Often under the responsibility of the Safety or Quality Manager.
CARRIAGE OF DANGEROUS GOODS
UK Statutory Instrument Nos 2092, 2094 & 2095 of 1996 and amended by 303 & 257 of 1999, together with their associated regulation contained in the Approved Carriage List and the Approved Requirements constitute the main pieces of legislation/regulation covering the Transport of Dangerous Goods within the United Kingdom (Explosives and Radioactives have further legislation)
CLOSED CUP (C.C.)
A test method used to ascertain the flash point of a liquid.
DOT UK
Department of Transport, United Kingdom
DOT USA
Department of Transport in the USA
DESIGN PRESSURE
The design pressure is used to calculate the thickness of the tank shell.
DGSA - DANGEROUS GOODS SAFETY ADVISOR
Within the European Union any company that handles or transports regulated substances/ hazardous chemicals must have a trained DGSA on their staff - Cassilon has two such members of staff.
E.I.R
Equipment Interchange Report. Notes on the physical condition of a piece of equipment made at a handover point.
FILL RATIO
The maximum volume of a product that is permissable to be loaded into in an individual tank container under the various Dangerous Goods codes and laws. There is a generally held misconception that the ratio is either 97% or 95%. See the article on Fill Ratios on this web site.
FLAME TRAP
A metal gauze which permits pressure to be expelled, but prevents flashback.
FLASH POINT
The temperature at which a liquid or a volatile solid gives off vapour, sufficient to form an ignitable mixture with air near the surface of the liquid or within the test vessel.
GRP - GLASS REINFORCED PLASTIC
This combination of resin and fibreglass is a common outer skin for tank containers; it is used to encase insulation round the tank.
GENERAL AVERAGE
Is an insurance term which describes the process whereby the parties whose interests have been sacrificed or who have incurred extra expense, are recompensed by the contribution of those whose interests have been saved. (see also York-Antwerp Rules)
HG - INCHES OF MERCURY
Is a unit of measurement for low pressure (usually vacuum).
HAZARDOUS GOODS
Generally refers to the collection of items listed by the United Nations and given UN numbers to regulate their safe carriage.
IMO - INTERNATIONAL MARITIME ORGANISATION
The international organisation responsible for regulating matters at sea
ISO - INTERNATIONAL STANDARDS ORGANISATION
International Standards Organisation. Refer to ISO1496/3 for testing tank containers for liquids and gases ISO6346 for the coding, identification and marking of freight containers ISO668 for classification, dimensions and ratings
IMDG - INTERNATIONAL MARITIME DANGEROUS GOODS CODE
Covers the transport of dangerous goods by sea and sets the rules and standards for sea freight shipments worldwide.
IGNITION TEMPERATURE
The minimum temperature required to initiate or cause self sustained combustion in any substance, in the absence of a spark or flame.
ISO TANK
See Tank Container
JUST-IN-TIME
A method of product supply, gauged to ensure the minimum of expenditure on stock holding.
KNOT
Unit of measurement for the speed (of a vessel) equal to one nautical mile (= 1,852meters) per hour.
LEAK TEST
This test means subjecting the tank shell to an effective internal pressure no greater than the MAWP (maximum allowable working pressure) but greater than 0.2bar.
MAWP - MAXIMUM ALLOWABLE WORKING PRESSURE
The maximum allowable working pressure is the highest pressure that should be used in the tank when it is being filled, discharged or moved.
N.V.O.C.C.
A Non Vessel Owning Common Carrier.
ONCARRIAGE
The carriage of goods/containers by any means of transport to the place of delivery, after discharge from the ocean vessel at port.
PTFE
Polytetrafluoroethylene is a plastic used for seals and bearings. It has a wide temperature tolerance and is resistant to most chemicals.
PV VALVE
A combined pressure vacuum relief valve used to protect the tank against excessive overpressure AND vacuum; also known as a prevac.
QUAY
That part of the wharf which is intended for the mooring of vessels.
RID
European agreement concerning the International Carriage of Dangerous Goods by Rail. These regulations govern rail shipments of dangerous goods between European countries.
RELATIVE DENSITY
The weight, in kilograms, of 1 litre of a liquid (see also Specific Gravity).
SPECIFIC GRAVITY
The weight, in kilograms, of 1 litre of a liquid (see also Relative Density).
T.E.U.
Twenty foot Equivalent Unit - A measurement of numbers of containers. A 20ft / 6m unit is one TEU, a 40ft or 12m unit is two.
TWISTLOCK
A device built into a chassis/trailer or a cellular vessel which is inserted into the corner fittings of a container and twisted to lock the container in place.
TANK CONTAINER
A tank, surrounded by a framework with the overall dimensions of a container, for the transport of liquid or gases in bulk.
UN MODEL REGULATIONS
aka The Orange Book. Issued by the United Nations, this book covers the transportation of regulated (hazardous) cargo and provides a set format for global transport.
ULLAGE
The free space left within the tank after it has been loaded.
VITON A
A synthetic rubber used for seals. It is highly non-porous, has good sealing properties and is tolerant to a wide spectrum of chemicals, including solvents.
VAPOUR PRESSURE
The pressure (often expressed in mm or inches of Mercury (Hg)) characteristic at any given temperature of a vapour in equilibrium with its liquid or solid form.
WHARFAGE
The fee charged for the use of a wharf for mooring, loading or discharging a vessel. This charge is not as prevalent as it once was. Where charged, it is traditionally, but not always, expressed as a percentage of the value of the cargo.
WAR RISK
Perils of war or warlike operations, such as capture, seizure, arrests, restraints of Kings, Princes and people, hostilities, civil war and strife - all apertaining to insurance clauses.
YORK-ANTWERP RULES
These rules govern the interpretation of the act of General Average. Rule A says - There is a general average act, when and only when, any extraordinary sacrifice or expenditure is intentionally and reasonably made or incurred for the common safety for the purpose of preserving from peril the property involved in a common maritime adventure.